Раствор для сохранения тепла
Наименование продукта: Раствор для сохранения тепла
Тип: Раствор для сохранения тепла
Упаковка: 50 кг / мешок
Теплосберегающий раствор представляет собой революционную систему, разработанную из цементного материала (цемент, песок, летучая зола) из сверхтонкого активного материала и присадок для наружных стен. Он прекрасно сочетает в себе гибкость высокополимерных материалов с долговечностью неорганических материалов. Он может приклеиваться к щелочирезистентной сетчатой ткани. Обладает отличной адгезией с раствором и щелочестойкой, с защитным слоем. Это уменьшает теплоту увлажнения на ранней стадии и усадку раствора. Это улучшает обрабатываемость, предел прочности и герметичность. Опрыскивание водой и специальное отверждение не требуется после нанесения.
Особенности и преимущества
- Strong bonding strength, good crack resistance, impact-resistance, anti-aging and water proof ability.
- Double edged with flexibility and durability, it has a defense system to both cold and heat variations of exterior temperature. It improves pore structure and crack resistance of mortar by compensating shrinkage.
- Good waterproof and breathable performance. There is also water retention property.
- Non-toxic, odorless and no pollution.
- Wall with this system can be decorated by using coatings, surface tiles or curtain walls.
Test Data Sheet
According to the national construction industry standard JG149 — 2003 expanded polystyrene board plaster exterior insulation system.»
| No. | Items | Criteria | Actual Results | |
| 1 | Cohesive strength， MPa
（with expansion polyphenyl panel） |
Normal condition | Destruction on expanded polystyrene panel interface ≥ 0.10 | 0.18 |
| Moisture resistance | Destruction on expanded polystyrene panel interface ≥ 0.10 | 0.18 | ||
| Anti-freezing/thawing | Destruction on expanded polystyrene panel interface ≥ 0.10 | 0.13 | ||
| 2 | Maximum operational time， h | 1.5 ～ 4.0 | 2 | |
| 3 | compressive strength / flexural strength | ≤ 3.0 | 2.1 | |
Application
- It’s used in grid cloth top coating of exterior wall heat preservation system, repairing of cracks in base layer and concrete defects as well.
- It’s used in top coating of heat preservation panel, interior & exterior wall, air-entrained concrete wall, hollow bricks wall and roof.
Uses
- Fully stir the mix of adhesive, heat preservation mortar and blending water. 10 minutes after agitation stops, it’s ready for use.
- The process from agitation to use-up shouldn’t take more than 2 hours.
- Do not add water randomly during use.
- Prohibit the construction during rainy day and when wind is more than 6 level;
- Anti-freezing type of heat preservation mortar is preferable when daily average temperature is below 5℃.
Recommended Consumption
- Recommended consumption upon 1 m2 is 1-1.5kg. One ton can cover 1000-800 m2 based on wall flatness.
- Coating thickness is 3-5 mm at consumption rate of 1-1.5kg/m2.
Package, Storage & Handling
- It’s packed in 50kg/bag.
- It should be stored in a dry and well ventilated ware house. Avoid damp contamination.
- Its shelf life is 12 months.