Naphthalene Sulfonate Formaldehyde (SNF/NSF/PNS)
Description
Naphthalene Sulfonate Formaldehyde (NSF) is a naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate and Poly Naphthalene Sulfonate (PNS) etc. It is a high range water reducer, commonly referred to as superplasticizer. It is a chloride free product that’s supplied as a brown powder to be instantly dissolved in water. It’s used to effect substantial water reduction to concrete without influencing normal setting time.
Standards Compliance
Naphthalene Sulfonate Formaldehyde (SNF/NSF /PNS) complies with the requirements of the following standards: ASTM C 494, Type F; ASTM C 1017 .
Typical Properties
Items | Specification | |
UNF-5 | FDN | |
Appearance | Light Brown Powder | Dark brown Powder |
Specific Gravity | 1.24 | 1.24 |
Sodium Sulfate Content, % | 18.0 max. | 5.0 max. |
pH value | 8–10 | 7 -9 |
Solid Content, % | 92 min | 92 min |
Moisture, % | 8.0max. | 8.0max. |
Fineness (0.315mm remains), % < | 15 | 15 |
Uses
- To provide initial workability especially with low water cement ratio.
- To significantly improve the initial workability of site mixed concrete without increasing water demand.
- To provide improved durability by increasing ultimate strengths and reducing concrete permeability.
- To have high slump retention with early setting time.
Typical Applications & Advantages
- Powerful plasticizing action with improved initial workability.
- Reduces water cement ratio to the maximum which allows production of high strength concrete while saving cement use.
- Improved cohesion and particle dispersion minimizes segregation and bleeding and improves pumpability.
- Long haul and hot weather concreting.
- Gains early strength with very high slump retention.
Dosage
The optimum dosage of Naphthalene Sulfonate Formaldehyde (SNF/ NSF /PNS) to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use.
Items | Specification | |
UNF-5 | FDN | |
normal dosage ranges | 0.5 to 1.0 kgs/100 kg of cementitious material | 0.4 to 1.0 kgs/100 kg of cementitious material |
Dosages outside the normal range quoted above can be used to meet particular mix requirements. Contact MUHU for advice in these cases.
Liquid product line design
Portland cement and for use with any other special cements contact MUHU.
Dosage
The optimum dosage of Naphthalene Sulfonate Formaldehyde (SNF/ NSF /PNS) to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use.
Items | Specification | |
UNF-5 | FDN | |
Normal dosage ranges | 0.5 to 1.0 kgs/100 kg of cementitious material | 0.4 to 1.0 kgs/100 kg of cementitious material |
Dosages outside the normal range quoted above can be used to meet particular mix requirements. Contact MUHU for advice in these cases.
Setting
Naphthalene Sulfonate Formaldehyde (SNF/ NSF /PNS) affords excellent control over initial and final setting times. Setting times of concrete mixes are related to cement type, mix design and ambient temperature.
Packaging & Storage
It’s packed in woven fabric bag with plastic liner. Net weight: 25kg.
Naphthalene Sulfonate Formaldehyde (SNF/ NSF /PNS) has a minimum shelf life of 12 months provided it is stored under cover, out of direct sunlight.
Health & Safety Precautions
Naphthalene Sulfonate Formaldehyde (SNF/ NSF /PNS) does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately and not induce vomiting.
For further information, refer the Material Safety Data Sheet available for this product.
Important note
MUHU endeavors to ensure that the technical information contained herein is true, accurate and represents our best knowledge and experience. No warranty is given or implied, as MUHU has no control over the conditions of use and the competence of any labor involved in the application.
As all MUHU technical data sheets are updated on a regular basis it is the customer’s responsibility to check that the product is suitable for the intended application, and that the actual conditions of use are in accordance with those recommended.