Mortar Plasticiser （MNC-E2）

Description

MNC-E2 can be used for plastering over lath wall, block work, brick work and tilt slab substrates. MNC-E2 displays a high level of workability and coverage, it resists sagging, cracking and shrinkage.

Uses

MNC-E2 It is generally used for:

• Applications where a solid wall plaster in layers up to 12mm are required.
• MNC-E2 is especially suited for professional plasterers.

Composition & Materials
MNC-E2 consists of a uniformly blended, properly proportioned mixture of sands, portland cement and other admixtures approved for use in mortar to improve water retention, workability and performance of the product.

Yield

Under ideal conditions one 30kg bag will cover 2.4m2 approx at 10mm – 12mm thickness.

Advantages

1. Better workability.
2. Increases bond strength.
3. Reduces trowel drag thus speeds up the work of laying bricks or rendering walls.
4. Replaces the use of lime.
5. Reduction of water/cement ratio.
6. Resistance to frost damage.
7. Improves bond and consolidation.
8. Greater plasticity
9. Cleaner work, less droppings.
10. Economical -fraction the price of plasticising paste.

Direction for use

1. Add to the gauging water at the rate of 600gms per 50kg of fresh Ordinary Portland Cement.
2. Never add directly to the dry aggregates.